With extensive use, the brushes on the Model T10042 may become worn and require replace- ment.
To replace the brushes:
1.Tilt the sweeper all the way forward to allow easy access to the brushes. For the sake of simplicity, only replace one brush at a time.
2.Remove the lock nuts and hex bolts indicated in Figure 15, and remove the old brushes. It is not necessary to remove the bolts and nuts connecting the brush holder to the brush shaft.
3.Install the new brush, making sure the over- lap bristles are properly oriented in relation- ship to the direction of brush rotation, as shown in Figure 15. Tighten the hex nuts.
| Brush |
Overlap Bristles | Rotation |
|
Remove
Brush
Rotation
