Grizzly specifications Specifications, MODEL T10051, Bench Shear, Instructions

MODEL T10051

12" BENCH SHEAR

INSTRUCTIONS

1.Overloading this tool can cause injury from flying parts if the tool breaks. Do not exceed the tool capacities.

2.NEVER operate the bench shear with- out the plastic safety guard in place.

4.Always chamfer and de-burr sharp sheet metal edges before bending in the bench hand brake. Sharp edges on sheet metal can result in severe cuts.

5.NEVER place your hands between the blades of the shear.

6.Always wear leather gloves and approved safety glasses when using this machine.

7.Inspect the bench shear for any cracked components or loose fasteners. Correct any problems before use. Loose hard- ware or cracks could result in sudden, unexpected movements during use.

8.DO NOT allow children to play with the bench shear.

9.If at any time you are experiencing difficulties performing the intended operation, STOP using the tool and contact our Technical Support at (570) 546-9663, or ask a qualified expert how the operation should be performed.

If you need help with your new item, call our Tech Support at: (570) 546-9663.

Figure 1. Model T10051.

Specifications

Maximum Cut Length	12"
Cutting Capacities (Thickness):
Steel	0.020"
Aluminum	0.050"
Brass	0.025"
Weight	28 lbs.

Damage to your eyes and hands could result from using this tool without proper protec- tive gear. Always wear safety glasses and heavy gloves when operating this machine.

Copyright © October, 2008 By Grizzly Industrial, Inc.

Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.

#jb11263 printed in CHINA