Grizzly T10460 owner manual Using Jig,  IjgciZDC$DkVakZON#, 7VX`c\ 7adX`

Using Jig

7Z[dgZjh^c\i]Z_^\!iV`Zi^bZidgZk^Zli]Zdlc" ZghbVcjVa[dgndjgh]VeZgidZchjgZi]ZXdggZXi hZijeVcYdeZgVi^c\egdXZYjgZh#

NdjVgZgZVYnidWZ\^ch]Ve^c\l]Zci]Z_^\VcY h]VeZgVgZegdeZganVY_jhiZY!eZghdcVaegdiZXi^kZ Zfj^ebZci ^h dc! VcY hV[Zin bViZg^Va ]Vh WZZc gZk^ZlZY#

Tip: Use a practice piece similar to the workpiece in order to test the results before shaping the workpiece.

Disconnect the shaper from power before making any adjustments to the shaper cutterhead or jig. Failure to do so could result in serious personal injury or property damage.

To use the jig:

1.EaVXZi]Z_^\dci]Zh]VeZgiVWaZVcYXdccZXi ^iidXdbegZhhZYV^g#

2. Ijgci]ZDC$D;;kVakZON#

3.Edh^i^dci]Zldg`e^ZXZVcYXaVbe^i^ci]Z_^\! Vhh]dlc^cFigure18#

Figure 18.H]Ve^c\_^\egZeVgZY[dgjhZl^i]

h]VeZgOFF#

Note: When using templates, always center the workpiece with the template to ensure symmetrical results. Always adjust the cop- ing fence or use a spacer block to provide a positive stop for the workpiece.

"&+"

Tip: To prevent tear-out in the workpiece shape end grain first. Wood is less likely to tear while edge-shaping, so any tearout from end grain shaping can be removed. Use a sacrificial backing block between the workpiece and the coping fence as needed to further reduce tearout (see Figure 19).

7VX`^c\ 7adX`

Figure 19.7VX`^c\WadX`^ceaVXZ#

4. Ijgci]Zh]VeZgON#

5. L]^aZ egZhh^c\ Wdi] XaVbe^c\ hl^iX]Zh! Vh h]dlc ^c Figure 20! bdkZ i]Z ldg`e^ZXZ hadlan V\V^chi i]Z gdiVi^dc d[ i]Z XjiiZg]ZVY jci^ai]ZXji^hXdbeaZiZ#

Figure 20.H]Ve^c\_^\^cjhZ#

6. Ijgci]Zh]VeZg OFF#

7. Ijgci]Z_^\DC$D;;kVakZOFF#

BdYZaI&%)+%"+)B[\#H^cXZ%&$&'