USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching.

SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.

MAINTAIN TOOLS WITH CARE. Cracked grinding stones may break and fly apart during operation. Inspect grinding bits for cracks before each use and replace cracked wheels immediately!

PREVENT ACCIDENTAL OPERATION. Do not carry tool with hand on trigger and always disconnect from air when not in use.

ELECTRICAL SHOCK HAZARD. Cutting into workpieces with hidden wiring can result in shock or electrocution. Check for hidden wiring before making any cuts.

BE AWARE OF HOSE LOCATION. Hoses

can easily become a tripping hazard when laid across the floor in a disorganized fashion.

SPEED RATING. Grinding bits and cut- off wheels operated at a faster speed than rated, may break or fly apart. Before installing, make sure the maximum allowable speed for the grinding stone or cut-off wheel is equal or higher than the speed of the tool.

AIR LINE CONNECTION INSPECTION. An air line that becomes disconnected from a tool can whip violently, causing severe injury. Verify that air line is properly connected and the fittings are tight and leak free. Leaking fittings can indicate the fitting is cracked and is about to fail.

WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may get caught in moving parts. Non- slip footwear is recommended. Wear a protective hair covering to contain long hair.

USE SAFETY GOGGLES. Also use a face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

Additional Safety Instructions for

Pneumatic Die Grinders

CHANGING BITS. When swapping grinding bits, disconnect the grinder from air to prevent an accidental start-up injury.

TOOL STABILITY. To establish the best control possible when grinding, hold the grinder with two hands, and stabilize your hands and body against a fixed object. Free-grinding (using one hand and no support) can allow the tooling to grab the workpiece and cause you to lose your grip on the grinder, leading to severe injury.

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.

Model T23091 1⁄4" Air Die Grinder

-3-

Page 4 Page 6
Page 5
Image 5
Grizzly T23091 owner manual Additional Safety Instructions for Pneumatic Die Grinders
Page 4 Page 6

T23091 specifications

The Grizzly T23091 is a powerful and versatile woodworking tool designed to meet the demands of both hobbyists and professional craftsmen. This 10-inch table saw is engineered with precision and innovation, making it an essential addition to any workshop.

One of the standout features of the Grizzly T23091 is its robust 2-horsepower motor. This strong motor allows users to cut through a wide variety of materials, including hardwoods and engineered woods, with ease and accuracy. The saw's direct-drive system ensures efficient power transfer, minimizing energy loss while maximizing cutting performance.

The T23091 boasts a heavy-duty cast iron table, which provides stability and a large work surface for handling sizable workpieces. With its finely ground surface, the table reduces friction, allowing for smoother cuts and enhanced overall performance. Additionally, the table features an extension wing that increases the surface area, making it easier to handle larger sheets of material.

Precision is crucial in woodworking, and the Grizzly T23091 does not disappoint. It includes a high-quality aluminum rip fence that can be easily adjusted to ensure straight cuts. The onboard measuring scale is clear and easy to read, allowing users to set cuts accurately. The fence locks securely in place, providing peace of mind during operation.

Safety is paramount when working with power tools, and the Grizzly T23091 incorporates several safety features. An accessible blade guard protects users from accidental contact with the saw blade while ensuring a clear view of the cutting line. The push stick and miter gauge included with the saw further enhance user safety by promoting proper cutting techniques.

Moreover, the T23091 features an integrated dust collection port. This allows for improved cleanliness in the workspace, helping to minimize debris and sawdust during operation. Users can connect a shop vacuum or dust collector for enhanced efficiency in maintaining a tidy work environment.

In terms of technology, the Grizzly T23091 is designed for ease of use, with intuitive controls that cater to both beginner and experienced users. The tool's durable construction ensures longevity, making it a worthwhile investment for anyone serious about woodworking.

In conclusion, the Grizzly T23091 combines power, precision, and safety features in one user-friendly package. Its strong motor, robust design, and thoughtful technology make it a reliable choice for achieving professional-quality results in woodworking projects.
Top Page Image Contents