03 Daily Use

Time - Allows you to set the time and date manually or update automatically from the DAB or FM radio broadcast.

Backlight - Allows you to set the backlight time-out from 10, 15, 30 and 60 seconds, or constantly on.

DON’T FORGET!

When using battery power, the backlight time-out will be set to 10 seconds when the DAB Radio is switched to standby. You can touch any button on the radio to turn the backlight on for 10 seconds if you want to view the time.

If you are using mains power, the backlight will remain lit in standby mode.

Factory Reset - this will reset all preset values and begin a full scan for DAB stations.

Software Version - This displays information about the current software installed in the DAB Radio.

Using the FM Radio

1If the DAB Radio is in DAB mode, press the MODE button to select FM mode.

DON’T FORGET!

You may hear background noise as no station has been tuned in. The display will show the frequency of the FM station.

Automatic Tuning

1Press the SCAN button to automatically search for the next available station.

2If the reception is poor, try Manual Tuning (see Manual Tuning below) to fine-tune the station.

DON’T FORGET!

If the reception does not improve, try altering the position of the antenna. If the reception is still poor, scan again to determine whether a stronger signal exists for the desired frequency.

Manual Tuning

1Rotate the SELECT button to manually tune through the frequency band.

2The frequency will increase or decrease in steps of 0.05 MHz for each turn of the SELECT button.

Storing FM Presets

You can preset up to 10 FM stations. The procedure for storing and recalling FM presets is the same as described on page 6.

11