Grundig hs 4020 manual Settings, Changing the styling attachments, Operation, Cleaning and care

Models: hs 4020

1 6
Download 6 pages 25.85 Kb
Page 5
Image 5

OPERATION ___________________________________________________________

Settings

Your appliance has the following setting options:

Temperature level/blower level C

0 : off

1 : gentle air flow and moderate temperature for gentle drying and styling

2 : stronger airflow and high temperature for fast drying and styling

Cold air setting C

: interrupts the hot air supply and provides cold air for fixing a hairstyles

Changing the styling attachments

1 Remove the styling attachment currently B in

place by pressing the catch and pulling off the heated brush.

2Place on a different styling attachment and allow to latch in place. The two markings (.) must be opposite each other.

Notes:

7The size of curls depends on the diameter of the styling attachment in use.

7The styling attachment with a diameter of

25 mm creates small and medium curls and is especially suitable for short hair.

7The styling attachment with a diameter of

38 mm can be used to attain greater volume with longer hair.

Operation

Check if the mains voltage on the type plate (on the handle of the appliance) corresponds to your local mains supply.

1Towel dry your hair thoroughly after washing.

2Plug the power cord D into the wall socket.

3Turn on the appliance with the switch C and set the temperature/blower level.

4If required you can interrupt the hot air sup- ply when drying by turning the switch C to »« (cold air setting).

Note

7The cold air setting interrupts the hot air oper- ation and provides a cool air flow. This allows you to fix your hairstyle better and more lastingly.

5 After use, switch off the appliance with the C button and pull out power cord D from

the wall socket.

Caution

7Never wind the power cord around the appli- ance, as this can result in damage.

Check the power cord and the appliance regularly for visible damage.

Cleaning and care

Pull the plug out before cleaning.

Never submerge the appliance in water.

Use a soft dry cloth for cleaning the housing. Remember to clean the air inlet grille E occa- sionally with a soft brush to remove any hairs and dust.

ENGLISH 5

Page 5
Image 5
Grundig hs 4020 manual Settings, Changing the styling attachments, Operation, Cleaning and care