OPERATION ___________________________________________________________
Using as a hairstyler
Check if the mains voltage on the type plate (on the handle of the device) corresponds to your local mains supply.
1Towel dry your hair thoroughly after washing.
2Plug the power cord F into the wall socket.
–The 3 metre salon length of the power cord ensures freedom of movement when styling.
3Turn on the appliance with switch D and set the blower level.
4Set the temperature level with switch C .
5If required, you can interrupt the hot air supply when drying by turning switch C to »❄« (cold setting).
Note
7The cold setting interrupts the hot setting with a flow of cool air. This allows you to fix your hairstyle better and more lastingly.
6 After use, switch off the appliance with the D button and pull out power cord F from
the wall socket.
Caution
7Never wind the power cord around the appli- ance, as this can result in damage. Check the power cord and the appliance regularly for visible damage.
Using as a hairdryer
When using as a hair dryer, attach the small concentrator nozzle 4 .