›Z 7 PRO7
TELEVISION OPERATION___________________
Zap function
With this function you may store the current channel position and switch to another one (zap).
1Use »1…0« or »P+«,
– On the picture screen appears, for example, »Z 7 PRO7«.
2Using »1…0« or »P+«,
3By pressing »Z« you may switch at any time to the stored chan- nel position (PRO7 in the example) and switch back (zap) to the last viewed channel.
4Press »i« to end the zap function.
– The
Alphanumeric channel selection
You may select the channel positions directly by entering the chan- nel name (e.g. ARD). For this, letters are assigned to the numeric buttons »2…0«. Up to four letters can be assigned.
1 Use »2…0« to enter the first letter of the channel name (e.g. »2« for the letter A).
– A list of all TV channels beginning with the letters »A«, »B«, or »C« appears on the picture screen.
– Every entry of a further letter confines the list of channel
names. |
| |
2 Use »P+«, |
| |
press »OK« to call it up. |
| |
Note: |
| |
Three methods are possible for selecting a channel position: |
| |
1. Letter entry off: The channels are only selected by entering |
| |
digits. |
| |
2. Letter entry on: The channels are only selected by entering |
| |
alphanumeric characters. |
| |
3. Mix: When entering a digit, the TV set switches automatical- |
| |
ly to the corresponding channel position and the channel list |
| |
for assigning letters is displayed. |
| |
The channel selection mode is selected in the »Installation« |
| |
menu under the »Special functions« menu item. See also the | ENGLISH | |
notes in the | ||
|
13
