OPERATION ________________________________________
Special features
The appliance has a titanium/stain- less steel ( A and B ) cutting head.
Trimming hair
1Put on a comb for the cutting grade you need (see the table below).
1
2To do this, latch the holders 1 of the comb attachment into the pins on the right and left side of the appliance 2 . First, push the left holder over the left pin, then the right holder over the right pin. Ensure that the holder you fixed first does not spring off the pin while you are doing this.
|
|
|
|
|
|
|
| 2 |
|
|
| 2 |
|
|
|
| ||||
|
|
|
|
|
|
|
3Place a towel around the neck and shoulder of the person whose hair you are trimming. Make sure the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls nat- urally and you can see the direc- tion in which it grows.
4Switch on the appliance using the switch D and start trimming.
5Turn off the appliance using the D switch when you have
finished trimming.
6Take off the comb.
