OPERATION ________________________________________
Using the lever C
You can continuously adjust the lever while trimming. This adjusts the trimming length without you having to attach a comb.
When the lever is at the top, the cutting length is shortest. The further you push down the lever, the greater the cutting length.
With the lever right down, the cutting length is the same as with a 3 mm comb attachment.
Using the lever extends the life of the blades, because the cutting angle changes with each adjust- ment.
If the blades are blocked by very thick hair, you can unblock them by moving the lever without having to remove the lower steel blade.
When you have finished trimming, clean the blades of hair clippings by quickly moving the lever from maximum to minimum with the appliance still on.
Comb attachment grades
Comb #1 | 3 mm |
Comb #2 | 6 mm |
Comb #3 | 9 mm |
Comb #4 | 12 mm |
Comb #5 | 16 mm |
Comb #6 | 20 mm |
Comb #7 | 25 mm |
|
|
Note
7All the lengths here are approxi- mate.
