Grundig MINI400 owner manual Batteries, Preventing Battery Acid Leakage, Adapter, Power On / Off

MINI400 OWNER’S MANUAL

BATTERIES

1.Remove the battery compartment’s cover by pushing the cover in the direction of the arrow.

2.Install two ‘AAA’ batteries according to the polarity diagram.

3.Turn on the unit.

Install the batteries according to the polarity diagram. After installing the batteries, it displays as above.

PREVENTING BATTERY ACID LEAKAGE:

To minimize the possibility of battery acid leakage, only use high quality alkaline, lithium or rechargeable nickel-metal- hydride batteries. Never intermix old with new, or different brands or types of batteries. Damage caused by battery acid leakage is not covered by this product’s warranty.

If the sound becomes low or distorted, replace with new batteries. If the radio will not be used for a long time, remove all the batteries to prevent possible battery leakage.

ADAPTER

The adapter’s DC socket is labeled 5 Volts, but you can also use a 4.5 Volt adapter, with positive polarity.

1.Plug one port of the adaptor into the AC socket and plug the other port into the DC jack.

2.Turn on the unit.

MINI400 OWNER’S MANUAL

POWER ON / OFF

1.Install the batteries.

2.Press the <POWER> button shortly to turn on the unit.

3.After turning on the unit, press the <POWER> button shortly again to turn off the unit.

HOLD FUNCTION

Push the <HOLD> switch in the right side of the unit down to lock the <POWER> button.

ALARM FUNCTION

Set the Alarm Time

1.Install the batteries.

2.Hold <ALARM> button down, the alarm time which was set last time and “ALARM” indicator appears in the display, at the same time, press <HOUR> shortly to set the hour and press <MIN> shortly to set the minute.

After setting, release <ALARM> button and the unit will save the settings automatically.

6 7