5.3Programming the HMM 470 modulator module Notes:

– Entries are saved by pressing the S button.

—> You will be returned to the item “Selecting the module/channel strip”.

–The programming process can be cancelled by pressing and holding the M button.

—> You will be returned to the item “Selecting the module/channel strip”.

Switch on the head-end station.

—> The display shows “SETUP  BE160” and the software version of the head-end station (e.g. V 7).

—> In the “SETUP” menu, the output level of the output collector can be adjusted

(see STC 160 assembly instructions).

SETUP BE160

Ein/On

V 7

Selecting the module / channel strip

•Press repeatedly if necessary to select the particular module (Bx …) or channel strip “A”, “B”, “C” or “D” to be programmed.

Bx 2A 4 AV MONO C21

M

Bx 2B 4 AV MONO C23

M

•Press the M button to activate the channel strip. —> The display shows this menu (for example)

“Bx 2A  4 AV MONO    C21 “: “Bx“ indicates the slot “2“ indicates slot no. 2

”A” indicates channel strip “A” ”C21” indicates the HF channel set

-12 -