MAINTENANCE

·Always unplug the unit before servicing it in any way.

·The water temperature of the water remaining in the unit after use may be high.

·Do not submerse the unit in water, or allow water to enter the inside of the unit or humidity spout. Only put water into the water tank.

INSIDE THE BODY OF THE UNIT

Pour excess water out of the unit, but do not allow it to enter the blast port. Wash out the unit with fresh water, using the cleaning brush and a soft cloth as needed.

OUTER SURFACE OF THE UNIT

Wipe the surface of the unit with a soft damp cloth if needed.

WATER TANK

If water spots remain in the water tank, wipe the inside down with a soft cloth. Do not use soap or detergents.

AIR FILTER

Gently wipe away debris from the filter with a soft cloth.

ULTRASONIC DISK

Remove water tank (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from this area. (Fig. 2) Diluted white vinegar will help to prevent this build up.

*Clean the disk with the brush only. No other cleaning tool should be used. Brush only. (Fig. 2)

Fig. 1

Fig. 2

STORAGE

·Fully dry the inside and outside of the unit before storing it.

·DO NOT leave water in the unit.

·Store in a cool dry place.

TROUBLESHOOTING GUIDE

PROBLEM

SOLUTION

 

 

Water mist & humidity are not

Power Plug: Unplug and then try again.

produced.

Power Failure: When the power is returned, try again.

 

 

Water Tank Installation: Make sure the water tank is

 

correctly attached. Make sure spring on tank cap moves

 

freely when pushed.

 

 

Air blows but water mist is

Excessive Water: Remove water tank. Empty a small

not produced.

amount of water from the base of the unit.

 

The desired humidity is lower than the current

 

temperature: increase the desired humidity.

 

Detergent residue in the water tank: Wash the water tank

 

out and try again.

 

 

Humidity level is low.

The surface of the ultrasonic disk is dirty. Clean with

white vinegar.

 

 

The water in the unit is too cold: Replace with cool, but

 

not cold water.

 

The ultrasonic disk is damaged contact customer service

 

at 866-603-5900.

 

 

Warm humidity is not produced.

It may take 10-15 min. before warm humidity is created.

 

 

The mist may not feel warm to the touch. Check to see

 

if base of unit feels warm to the touch. If so then warm

 

mist is being produced.

 

 

The humidity has a bad smell.

Poor maintenance or dirty water: Clean the product

 

thoroughly, and fill it with fresh water.

 

 

White dust is forming on nearby

Hard water may deposit a certain amount of dust. Dust in

furniture.

the air also settles because of added humidity in the room.

 

*Use distilled water if this becomes a nuisance.

 

Or order a Decalcification Filter (FLTDC)

 

by calling 1-866-603-5900 or visiting

 

www.guardiantechnologies.com

 

 

6

7

Page 4
Image 4
Guardian Technologies H2500 warranty Maintenance, Storage, Troubleshooting Guide

H2500 specifications

The Guardian Technologies H2500 is a state-of-the-art air purification system designed for homes and offices, emphasizing the importance of clean, healthy air. As air quality becomes a growing concern, the H2500 offers an array of features, technologies, and characteristics that make it stand out in the market.

One of the primary features of the H2500 is its advanced filtration system. It employs a true HEPA filter that captures 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, smoke, and pet dander. This level of filtration is essential for allergy sufferers and those looking to enhance their indoor air quality. Coupled with the HEPA filter is a charcoal pre-filter that helps eliminate unpleasant odors, making your living space more inviting.

The H2500 is also equipped with Guardian Technologies' patented UV-C light technology. This feature utilizes ultraviolet light to kill harmful bacteria and viruses, further ensuring that the air in your home is not only free of particulates but also sanitized. By combining HEPA filtration with UV-C technology, the H2500 effectively addresses a wide range of air quality concerns.

In terms of design, the H2500 is sleek and compact, making it suitable for various room sizes and decor styles. It's lightweight and portable, allowing users to move it easily from one location to another. The unit also includes a user-friendly interface with intuitive controls, making it easy to adjust settings based on your air quality needs.

The H2500 operates quietly, even at higher speeds, making it perfect for bedrooms or office environments where noise levels need to be kept to a minimum. It features multiple fan speeds, allowing users to customize air purification levels according to their preferences and the specific air quality conditions.

Another key characteristic of the Guardian Technologies H2500 is its low energy consumption. The unit is designed to be energy-efficient, ensuring that it will not significantly impact your electricity bill while providing continuous air purification.

In summary, the Guardian Technologies H2500 air purifier combines advanced HEPA filtration, innovative UV-C light technology, a sleek design, quiet operation, and energy efficiency. It represents an excellent investment for anyone looking to enhance their indoor air quality and promote a healthier living environment.