Haier 0010515194 Outdoor unit

Outdoor unit

Install according to

To bend a pipe, give the roundness as large as possible not to crush the pipe.

Connecting the pipe of gas side first makes working easier.

The max vertical distance between the indoor unit and the outdoor unit is 5 m.

Be careful that matters, such as wastes of sands, etc. shall not enter the pipe.

Half union

Use the same method on indoor unit. Loosen

the screws on terminal block and insert the

plugs fully into terminal block, then tighten the

screws.

Insert the cable according to terminal number

in the same manner as the indoor unit.

If wiring is not correct, proper operation can

not be carried out and controller may be

damaged.

Fix the cable with a clamp.

Drain hose

If the drain-elbow is used, please attach it as

figure.

Flare nut Forced fastening without careful

centering may damage the

threads and cause a leakage of gas.

Pipe Diameter Fastening torque

Spanner Torque wrench

Note: Only for heat pump unit.

Drawing for the installation of indoor and outdoor units

Liquid side 6.35mm(1/4") 18N.m

Gas side 9.52mm(3/8")

Gas side 12.7mm(1/2")

42N.m

55N.m