Washing sequence
Wash timer
(To set to below 2 minute,
Water inlet first set to 6 minute then turn it back. it can increase the service life of the timer).
OFF
Wash selector
(standard current, strong current)
STRONGÇ ¿ Ï ´
STANDARD± ê × ¼
DRAINÅ Å Ë ®
Spin timer
(to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).
OFF
WASH TIMER | WASH SELECTOR | SPIN TIMER |
Wash
Set the water inlet selector at the "WASH" side. (Figure 1)
2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)
Run washing program for some time to stir and dissolve the powder completely.
WASH
SPIN 
Figure 2
3.Put in the laundries. If the water quantity is insufficient, please add water.
4.Select the current.
Select the strength of the current according to the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries. (Figure 4)
6.After washing, Set the "WASH SELECTOR" at "DRAIN". (Figure 5).
STRONGÇ ¿ Ï ´
STANDARD± ê × ¼
DRAINÅ Å Ë ®
WASH SELECTOR
Figure 3
OFF
WASH TIMER | Figure 4 |
| STRONGÇ ¿ Ï ´ |
| STANDARD± ê × ¼ |
DRAINÅ Å Ë ®
WASH SELECTOR
Figure 5
8
