Haier 650 user manual Washing sequence

Washing sequence Using process

Wash timer

(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).

		Water-filling selector handle
	Overfilling sign
Wash selector Water-filling entrance	Buzzer
			Spin timer
(standard current,	(The buzzer will ring when	(to	set	to below 1 minute,
strong current)	the washing finishes)	first	set		to 2 minute then

turn it back. it can increase the service life of the timer).

OFF SILK	STRONG	BUZZER	SPIN TIMER OFF SILK
WOOL			WOOL
	STANDARD
		OFF
		DRAIN
COTTON		MAX

LINEN

WASH TIMER

Wash

WASH SELECTOR

1.Water-filling selector

(1)Set the water-filling selector at the "WASH" side. (Figure 1)

(2)Set the water level adjusting lever to needed line.

2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)

Run washing program for some time to stir and dissolve the powder completely.

WASH SPIN

Figure 1

Figure 2

STRONG

3.Put in the laundries. If the water quantity is insufficient, please add water.

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

STANDARD	DRAIN
WASH SELECTOR		Figure 3

OFF SILK

WOOL

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

WASH TIMER

COTTON LINEN

Figure 4

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 5