Washing sequence
Wash timer
(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).
OFF 
15
3
12 | 6 |
WASH TIMER
9
Wash selector
(Strong current, standard current)
STRONG
STANDARD
DRAIN
WASH SELECTOR
Spin timer
(to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).
| OFF |
5 | 1 |
4 | 2 |
SPIN TIMER
3
Wash
1 
Inlet selector
(1)Set inlet selector to 
Wash 
side. 
Figure 1 
(2 )Adjust water level rod to a position as needed.
2.Fill the water and add the dissolved washing
powder to make the water level reach the preset position. (Figure 2)
Run washing program for some time to stir and dissolve the powder completely.
3.Put in the laundries. If the water quantity is insufficient, please add water.
4.Select the current.
Select the strength of the current according to the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries. (Figure 4)
WASH 
INLET SELECTOR 
SPIN Figure 1
Figure 2
STRONG
STANDARD
DRAIN
Figure 3
OFF 
15
3
12
6
Figure 4
9
STRONG
6.After washing,the buzzer will ring .Set the "WASH SELECTOR" at "DRAIN". (Figure 5).
STANDARD
DRAIN
Figure 5
8
