Basic Operation
Reversible door
1.Detach the plug (6) at the left upper corner and the component (1) at the left lower corner.
2.Detach the cover (5) of the hinge box at the right upper corner to remove the upper hinge. Hold and lift the door to take it out and put aside.
3.Detach the lower hinge (2) and the component (3). Insert the component (3) to the left hole of lower hinge (2) and tighten.
4.Assemble the component (1) to the corresponding position on the right side and tighten.
5.Assemble the upper hinge (4) to the corresponding position on the left side and tighten.
6.Assemble the door from below on the hinge (4).
7.Assemble the lower hinge (2) to the left side of the door.
8.Insert the plug (6) on the right upper corner.
9.After reversion of the door, open and close the door for several times to see to it that there is no unusual noise and all the screws and hinges are tightened.
(5)
(4)
(6)
(3)
(2)
(1)
.5.
