Haier Automatic Drum Washing Machine Before Use, Installation, Dismantle The Transportation Bolts

06BEFORE USE

INSTALLATION

DISMANTLE THE TRANSPORTATION BOLTS

The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process.

1.Remove the back cover.

2.Remove the four bolts on the rear side and take out the synthetic stabilisers from within the machine.

3.Replace the back cover.

4.Fill the holes left by the bolts with blanking plugs.

Note:

1.When you replace the back cover,the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in fig.5.

2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.

ADJUSTING THE WASHING MACHINE

5.

There are adjustable feet under the bottom of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as stable and flat as possible.