Haier DD350RB, DD400R*, DD300RW, DD450R* manual Sencond step, Anti-tipBracket Screw

Sencond step:

Take the anti-tip bracket and screws from the accessory bag. Tighten the anti-tip bracket on the top of the product with screws as following the illustration

Note:Please install just as following illustrations about holes,If you choose wrong hole,it will do damage to the top of your product and screws.Besides,you should adjust the position of bracket base on the height of unit in advance，so that we could save operation of taking out the unit of counter again to choose position of bracket in next step.

Anti-tip Bracket

Screw

Third step: Put the unit inside of counter.Pull upper drawer open and attach the anti-tip

bracket to counter by screw. You can adjust the feet on the corners of unit (Part 7 in Structural

drawing)

8