Haier GDZ5.0-1 user manual Control panel and its functions

3. Control panel and its functions

Heat Selector Knob

Select drying level according to the material, quantity and drying requirements of the clothes to be dried as shown in the figure

Select ' Strong Dry' for clothes particularly thick and in large quantities or in lower room temperature.

Select ' Soft Dry ' for clothes not resistant to heat (like nylon and chemical fibre ).

Soft

Strong

Heat Selector Knob

Drying Timer Knob

Select dry program according to clothes materials and quantity, turn the timer knob to relative position.

Air drying		OFF
For down, sweater,
		Power off when the
mohair, cotton sweater
		timer knob in
and cotton-padded
		'OFF' position.
clothes needing
		The dryer starts
freshening, tumbles
		when turn the knob
without heat. Also can
		clockwise.
be individually used for
clothes long time in
closet with the			OFF
same results.				Cooling
		60	0
		40		20
OFF	20
Power off when the
timer knob in	OFF	0

Cooling

Motor keeps running after dryer time heating finished while heater stops working and cold air into the drum to cool laundry. The whole cooling will be finished once the timer knob gets to ‘OFF ' position.

Heating

For clothes resistant to heat,

40(Check the label on the article to be dried, to make sure it

60can be safely tumble dried) , the heater is working.

According to clothes

'OFF' position. The dryer starts when turn the knob

220

80 materials and quantity, turn

100	the timer knob to relative
	position. Select ' Strong Dry'

clockwise.200120

180140

160

Dry Time Reference Table

for clothes particularly thick

and in large quantities.Refer to

'Dry Time Reference Table'.

Dry Capacity Approx.1kg Approx.2kg Approx.3.5kg Approx.5.0kg

Strong Approx.50min Approx.90min Approx.160min Approx.200min

Dry time

Soft Approx.90min Approx.150min Suggest use 'strong' Suggest use 'strong'

Dry time affected by many factors, such as material, weight, thickness and the hydrated

ratio of clothes , the above listed dry time is only for reference.

9