Haier HDM8.0-61 user manual Care And Cleaning, Cleaning of filters

Exhaust vent shroud

Care And Cleaning

Clean the buildup such as lints on filters in time after each use, otherwise it will affect the performance of your dryer.

Please unplug the power cord first when cleaning it.

Cleaning of filters

The lint filter must be used for drying.

It must be cleaned in time befor and after each use.

1. Remove the filters

Remove by pulling straight up with hands inserted into the four holes around the exhaust vent shroud in the sequence of 'Exhaust vent shroud - Lint filter - Exhaust filter'.(as shown in figure 1)

2. Clean the lints

Separate 'exhaust vent shroud','lint filter' and 'exhaust filter' and clean the lints on the filter and exhaust filter with a soft brush or vacuum cleaner. Can also clean the filters with water.

Do not damage the filters. (as shown in figure 2)

3. Install the filters

After cleaning, assemble in the sequence of 'exhaust filter -filter-exhaust vent shroud',align the recesses in the center of filter with the projection in the center of drum and make sure that it is firmly inserted (as shown in figure 3)

The filter fixed in the

bottom of the drum

Lint	Exhaust	Figure 1
filter	Filter

Lint Filter Lints Exhaust Filter Dust Cleaner

Figure 2

Note: The filter fixed in the bottom of the drum shall also

Figure 3

be cleaned with a soft brush.(as shown in figure 1)

Clean the interior drum or dryer

housing, with wet soft cloth, if stained.

Do not wash directly with water.

Do not use thinner, gasolene or alcohol.

Do not use any type of spray cleaner when cleaning the interior. Hazardous fumes or electric shock could occur. If dryer drum becomes stained, clean the drum with a damp cloth. Remove any residue before drying the next load.

Clean cabinet with mild soap and water. Donot use harsh or abrasive cleaners, this could damage the dryer.