Haier HDT18PA Dishware chipped, Noise, Steam is coming out from back of the unit, Oversudsing

Models: HDT18PA

1 26
Download 26 pages 48.93 Kb
Page 19
Image 19
Dishware chipped:

GB

Dishware chipped:

This is due to poor loading or overloading. You need to be careful when loading. Do not overload. You need to place glassware securely against pins. Make sure delicate items are on the side rack. We recommend that fine chinaware or crystalitems should be hand washed.

Noise:

Some of the sounds you will hear are normal.

You will hear sound of the water fill and rinse.

You will hear drain valve opening to pump water out.

You will hear motor stopping at the end of the cycle.

If some utensils are not secure in the rack, you will hear that they are being tossed

around the tub.

Steam is coming out from back of the unit:

This is normal.

You will see that steam is coming out through the back exhaust outlet during the dry cycle and when the hot/warm water is being pumped out through the drain hose.

Oversudsing:

This is due to use of regular hand washing detergent.

You may need to check if the detergent is for "Automatic Dishwasher Use". If not then you need to use the proper detergent that is for dishwasher.

Dishware has an odor:

This is due to incomplete cycle.

You need to allow cycle to be fully completed.

New scented detergent used.

This is normal because different types of detergents may have different frgrances.

18

Page 19
Image 19
Haier HDT18PA Dishware chipped, Noise, Steam is coming out from back of the unit, Oversudsing, Dishware has an odor