Haier HDW100SCT, HDW100WCT manual during washing, Troubleshooting

Models: HDW100WCT HDW100SCT

1 16
Download 16 pages 58.17 Kb
Page 12
Image 12
...during washing

Troubleshooting

the nature of the problem.

the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate located on the side of the inner part of the door.

Lower spray arm rotates with difficulty

Spray arm is blocked by small items or food remains.

Lid in detergent compartment cannot be closed

Detergent compartment has been overfilled.

Mechanism is clogged with remnants of detergent.

Remnants of detergent stuck inside dispenser

Compartment was damp when it was filled up with detergent. Compartment must be dry before detergent is added.

Water remains inside appliance after programme has ended

Blockage or kind in drainage hose.

Pump is jammed.

Filters are blocked.

The programme is still running. Wait for the programme to end.

...during washing

Unusual amount of foam is creased

Normal washing up liquid has been poured into the rinse-aid container.

Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle.

Appliance stops suddenly while washing is taking place

Cut off electricity supply to appliance.

Water supply has been interrupted.

Knocking sound can be heared while washing is taking place

A spray arm is knocking against the dishes inside the appliance.

Rattling sound can be heared while washing is taking place

Crockery has not been stacked properly inside the appliance.

Knocking sound coming from inlet valves

11

This is caused by the way the water pipes have been laid and it has no effect upon the way the appliance functions. There is no remedy for this.

Page 12
Image 12
Haier HDW100SCT, HDW100WCT manual during washing, Troubleshooting