Troubleshooting

Lid in detergent compartment cannot be closed

Detergent compartment has been overfilled.

Mechanism is clogged with remnants of detergent.

Remnants of detergent stuck inside dispenser

Compartment was damp when it was filled up with detergent.

Compartment must be dry before detergent is added.

Water remains inside appliance after programme has

ended

Blockage or kind in drainage hose.

Pump is jammed.

Filters are blocked.

The programme is still running. Wait for the programme to end .

...during washing

Unusual amount of foam is creased

Normal washing up liquid has been poured into the rinse-aid container.

Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle.

Appliance stops suddenly while washing is taking

place

Cut off electricity supply to appliance.

Water supply has been interrupted.

Knocking sound can be heared while washing is tak-

ing place

A spray arm is knocking against the dishes inside the appliance.

Rattling sound can be heared while washing is taking

place

Crockery has not been stacked properly inside the appliance.

Knocking sound coming from inlet valves

This is caused by the way the water pipes have been laid and it has no effect upon the way the appliance functions. There is no remedy for this.

...with the dishes,cutlery, etc.

Remnants of food are stuck to the dishes, cutlery,etc.

Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, ect.

Too many items in the rack.

Items in the rack were touching each other. Not enough detergent was added to dispenser. Selected wash programme was not intensive enough. Rotation of spray arm was obstructed by dishes, etc. Nozzles in spray arm are blokcked by remnants of food. Filters are blocked.

Filters have been incorrectly fitted.

Waste-water pump is jammed.

Plastic items are discoloured

Not enough detergent was added to dispenser.

Detergent has insuffcient bleaching properties. Use a deter-

gent containing a chemical bleaching agent.

White stains are left on crockery, glasses have a milky

appearance

Not enough detergent was added to dispenser compartment. Amount of rinse-aid was set too low.

Although water is quite hard, no salt has been put in appliance. Water softener was set too low.

If you used a phosphate-free detergent , try a detergent con- taining phosphates and compare results.

Dishes,cultlery,etc.have not been dried

Selected programme did not include drying function.

Amount of rinse-aid was set too low.

Items were removed from dishwasher too soon.

Glasses have a dull appearance

Amount of rinse-aid was set too low.

Tea stains or traces of lipstick have not been com-

pletely removed

Detergent does not have a sufficient bleaching effect.

Washing temperature was set too low.

Traces of rust on cutlery

Cutlery is not sufficiently rustproof.

Glasses become clouded and discoloured; coating

cannot be wiped off

Unsuitable detergent was used.

Glasses are not dishwasher-proof.

Smears left behind on glasses and cutlery; glasses

have acquired a metallic appearance

Amount of rinse-aid set too high.

.9.

Page 10
Image 10
Haier HDW100SST, HDW100WHT Lid in detergent compartment cannot be closed, Remnants of detergent stuck inside dispenser