Haier HLP141E, HLP140E user manual Press ‘Start’

English

3.Set Cycle and Start

To start drying a laundry load using Auto Dry with presets for Temperature and Time, there are 3 easy steps:

1.	Turn ‘Power ON’	Power
		On/Off
3.	Press ‘Start’	Start
		Pause

2. Choose drying Cycle –	Cycles
Normal, Heavy or Delicate

Status	150	A
	120
Dry		U	Normal
		T
Cooling	90	O	Heavy		High
		R				Power
		D
End Cycle	60	Y	Delicate		Low	On/Off
Clean Filter	30		Timed Dry		Air-Dry
						Start
	Dry					Pause
		Cycles		Temp
Time

2

3

1

Note

Normal , Heavy and Delicate Cycles are auto-set for Temperature and Time to dry a regular load. Timed Dry Cycle is for manual selecting Dry times and Tempera- tures. (See next page for instructions)

4.Cooling Status.

When ‘Cooling’ Status LED is ON, the Cooling down time takes 10 minutes for dryer along with the garments.

If you want to take out clothes in the middle of drying cycle, please use caution and carefully take out the HOT clothes.

5.End Dry Cycle

A beeper alarm alerts you when the Drying Cycle ends, then the dryer will power off. Take out the clothes as soon as possible.

6.Clean Filter

‘Clean Filter’ Status LED reminder goes ON. After drying each load of clothing, always clean the lint filters.

Exhaust Vent

Casing

14