OPERATION INSTRUCTIONS CONT.
ENGLISH
NOTE: Both of TIME DEFROST and AUTO DEFROST can be set as the first stage. Convenience Cooking pads(i.e.Popcorn) cannot be used for
TIME DEFROST
1.Touch the TIME DEFROST pad, the display will show dEF2.
2.Enter desired defrosting time with the number pad.
NOTE: The default power setting for defrosting is 30% (PL3), to change the power level touch POWER once to display the current power "PL 3", then press the number pad of the power level you wanted.
3.Touch START/+30 Sec to begin defrosting.
AUTO DEFROST
1.Touch the AUTO DEFROST pad, the display will show dEF1.
2.Enter weight to be defrosted in ounces (oz.) with the number pad, from 4 to 100 oz.
3.Touch START/+30 Sec to begin defrosting.
•After setting AUTO DEFROST, the oven can be programmed to automatically switch to
•During defrosting, you need to turn food over for uniform defrosting. After turning, touch START/+30 Sec pad to resume defrosting.
SETTING CHILD LOCK
The safety lock prevents unsupervised operation by children. Set the function in standby mode.
To set: Press and hold STOP/CLEAR for 3 seconds. Lock icon is indicated on the display and there will be a long beep.
To cancel: Press and hold STOP/CLEAR for 3 seconds, there will be a long beep. Lock icon disappears from the display.
MEMORY
You can store up to 5 programs into memory for future use:
Touch the MEMORY pad, the number 1 will be displayed*. Set a 1 or 2 step cooking procedure as described above. Press MEMORY to save the setting.
To use a stored program, Touch the MEMORY pad, the number 1 will be displayed. Touch the START/+30 Sec pad.
*Touch MEMORY repeatedly to access memory locations 2 through 5.
PRE-SET COOKING
1.Program the clock if it has not been programmed.
2.Set a 1 or 2 step cooking procedure as described above.
3.Touch the CLOCK pad, the hour figure on the clock will flash
4.Enter the time desired for the program to begin (example 3:15 is entered as 0315, 11:30 is entered as
1130)
5.Set AM or PM with the AM/PM pad
6.Touch the START/+30 Sec pad
7.The procedure will begin at the set time.
