Starting up the ice maker and dispenser

Preparations before starting up the ice maker and dispenser

The ice maker can be connected either directly to a water supply line if fitted with a filter (option A) or to a drinking water container if fitted with a water pump (option B).

Cut the water line to the right length to prevent it from kinking. The recommended maximum length for the water line is 12 m. The pressure drop resulting from an excessively long water line could adversely affect the ice cube maker capacity.

Keep the water line away from heat sources.

The water supply line should be installed and checked by professionals.

When calling for refrigerated water for the first time, keep pressure on the dispenser lever for one minute several times until water flows out, in order to allow the water tank inside the appliance to fill up. Be sure not to hold the dispenser lever pressed for too long, otherwise the water valve may overheat.

Option A:

Water supply line installation

The pressure of the cold water supplied to the ice maker should be within 1.5-8.5 bar.

It is recommended to use drinking water for producing ice cubes since the filter does not sterilise bacteria.

Connect to potable water supply only.

Option B:

The water pump must be connected to its own outlet and properly grounded. Removal or modification of the water pump and modification or repair of the water supply line by unauthorised persons are not permissible.

To prevent fire, do not store or use flammable products such as fuel near the water pump.

The water pump is to be used solely with room temperature water; it is not suitable for use with chemicals, fruit juice or other grainy drinks, coffee or other hot liquids.

If the water pump will not be used for en extended period of time, pull out its power plug.

Periodically check the water tank to make sure that the water level is sufficient. Do not push, shake or knock the water pump.

Place the water pump and drinking water container on a sturdy and level surface. After opening the small lid of the drinking water container, protect the opening with a dust cover. Guide one end of a hose to the bottom of the container and connect the other end to the water pump inlet (indicated by an INLET symbol). Connect one end of another hose to the water pump outlet (indicated by an OUTLET symbol) and the other end to the water valve inlet under the back of the refrigerator.

Fill with potable water only.

26

Page 28
Image 28
Haier HRF-661RSSAA Starting up the ice maker and dispenser, Preparations before starting up the ice maker and dispenser

HSBS562IS, HRF-661TSAA, HRF-661RSSAA specifications

Haier has established itself as a leader in the home appliance market, particularly renowned for its innovative and efficient refrigeration solutions. Among their extensive range, three noteworthy models stand out: the Haier HSBS562IS, HRF-661RSSAA, and HRF-661TSAA. These refrigerators combine cutting-edge technologies with sleek designs, catering to a wide array of consumer needs.

The Haier HSBS562IS is a side-by-side refrigerator that boasts a modern stainless-steel finish, imparting an upscale look to any kitchen. One of its standout features is the Total No Frost technology that eliminates ice build-up, ensuring the internal compartment remains frost-free and that food is always fresh. Its large capacity makes it perfect for families, with spacious shelves that allow for easy organization. Furthermore, it incorporates LED lighting, providing better visibility while consuming less energy than traditional lighting options.

On the other hand, the HRF-661RSSAA and HRF-661TSAA models offer similar features with slight distinctions. The HRF-661RSSAA is particularly appealing due to its sleek black stainless-steel finish which adds a contemporary feel. Both models utilize advanced inverter compressor technology, which provides precise temperature control, reduces energy consumption, and operates quietly, enhancing user experience. The inverter technology dynamically adjusts the compressor speed according to cooling demands, resulting in optimal energy efficiency and food preservation.

Another intriguing feature of the HRF-661 series is the Multi-airflow system, which promotes uniform cooling throughout the fridge and freezer compartments. This technology ensures that every corner of the refrigerator gets chilled air, maintaining consistent temperatures and preventing uneven cooling. Additionally, these models come equipped with humidity-controlled crisper drawers, perfect for keeping fruits and vegetables fresh by maintaining the ideal moisture levels.

The Haier HSBS562IS, HRF-661RSSAA, and HRF-661TSAA are designed with user convenience in mind. They feature easy-to-use digital controls that allow users to adjust temperatures effortlessly. The adjustable shelves and door bins provide flexible storage options, accommodating various sizes of food items and containers. Finally, the energy efficiency of these models is worth noting, as they are designed to consume less electricity without compromising performance.

In summary, Haier’s HSBS562IS, HRF-661RSSAA, and HRF-661TSAA refrigerators offer a blend of innovative technologies, stylish designs, and practical features that cater to modern-day needs, ensuring food is stored safely and conveniently while enhancing the overall aesthetic of your kitchen.