Operation
Emergency and Test Operation
Emergency operation:
Use this operation only when the remote controller is defective or lost.
When the emergency operation switch is pressed,the" Pi "sound is heard once, which means the start of this operation.
In this operation, the system automatically selects the operation modes, cooling or heating, according to the room temperature.
Temperature | Operation | Designated | Timer | Air flow |
| mode | temperature | mode |
|
ABOVE 23OC | COOLING | 26OC | NO | AUTOMATIC |
BELOW 23OC | HEATING | 23OC | NO | AUTOMATIC |
It is not possible to operate in dry mode.
Test operation:
Test operation switch is the same as emergency switch.
Use this switch in the test operation when the room temperature is below 16OC, do not use it in the normal operation.
Continue to press the test operation switch for more 
than 5 seconds. After you hear the "Pi" sound twice, 
release your finger from the switch: the cooling operation 
starts with the air flow speed "Hi".
After 30 minutes, test operation ends automatically.
Removal of the restriction of emergency or test operation
Press the emergency operation switch once more, or manipulate through the remote controller; the "Pi" sound, the emergency or test operation is terminated.
When the remote controller is manipulated, it gets the system back to the normal operation mode.
19
