Haier HVCE24, HVCE15 Wine Cellar Installations, English, Interior Light, Installation Limitations

English

Shelving (will vary by model purchased)

•The shelves are chrome-plated glide-out with wood trim. They are designed for flexibility and easy cleaning. The shelves are designed to allow free air movement.

Interior Light

•To complement the look of your wine collection, a soft light has been built

into the wine cellar. The light switch is on the front bottom, or on the electronic control panel.

Normal Operating Sounds You May Hear

•Boiling water, gurgling sounds or slight vibrations that are the result of the refrigerant circulating through the cooling coils.

•The thermostat control will click when it cycles on and off.

WINE CELLAR INSTALLATIONS

Installation Limitations

•Do not install your wine cellar in any location not properly insulated or heated, e.g. garage etc. Your wine cellar was not designed to operate in temperature settings below 55˚ Fahrenheit.

•Select a suitable location for the wine cellar on a hard, even surface away from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located on the front and rear bottom corners of the wine cellar.

Dimensions

•Built-in wine cellars need to be ventilated from the front. This feature allows the unit to be built-in in an enclosed area. The bottom front grille should be clear of all obstructions. This is absolutely necessary for the air to circulate and for the unit to operate efficiently. The dimensions for installation are as

follows (W x D x H):

7