English
INSTALLING YOUR WINE CELLAR
Unpacking Your Wine Cellar
1.Remove all packaging material. This includes the base and all adhesive tape holding the wine cellar accessories inside and outside.
2.Inspect and remove any remains of packing, tape or printed materials before powering on the wine cellar.
Proper Air Circulation
•To assure your wine cellar works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation and electrical connections.
•The following are recommended clearances around the wine cellar
Sides | 2" (50mm) |
Top | 4" (100mm) |
Back | 2" (50mm) |
• Do not over fill your wine cellar for proper internal air circulation.
NOTE: Allow enough space in the front of the unit to open the door to 120˚.
4
