Haier HW-12LM13, HW-07LM13, HW-12LM03, HW-09LM13 Installation of air-conditioner only for reference

Installation Guide

	Installation of air-conditioner (only for reference)	Iron frame
1.	Make the wall hole or window hole (see Fig.1).	350
2.	Fix the prefabricated iron frame to stable
	position by expansible screws.
3.Take out the conditioner and accessories		Width of the wall
	from the package .
		Fig. 1

4.Cooling-only type air-conditioner: before dispatched from the factory, the drip hole at the bottom plate has been blocked by rubber lid in the accessories. If the surrounding humidity is high, should assemble drainage bend in the drainage hole at the back of bottom plate and connect the drainage tube as illustrated in Fig. 3. If the user doesn't need to retain the condensate in the bottom plate, can remove the rubber lid on the bottom and as illustrated in Fig. 2, assemble the attached drain pan on the bottom of the air-conditioner, and connect drainage tube at the water outlet hole on the drain pan.

5.If you need to lead the condensed water to indicated position, please purchase a piece of plastic pipe , set it on the outlet pipe fitting and tie it tightly.

6.After installation of all the accessories, put the whole machine on the iron frame. If there's water outlet flexible pipe, lead the pipe to needed position(see Fig.4).

7.Fill any distance between the wall hole and the machine body with flexible sponge rubber strip to prevent the entering of outer noise and the leaking of the coolness.

8.After installation of the conditioner, insert the power plug into the outlet and perform test-run.

Condenser

Rubber lid

Drain pan

Screw

Fig. 2

Condenser

Outlet pipe fitting

Water outlet flexible pipe(provide by user)

Fig.3

Wall

Water outlet flexible pipe(provide by user)

Fig.4

12