Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The | height | of the drain | hose shall be less | than | 1.2m , |
or | the drainage will not | be smooth enough and cause | |||
incomplete | drainage. |
|
|
| |
|
|
| H | 0.7m<H | 1.2m |
2.Do not step on or press the drain hose.
Install the water inlet hose; Select the water level
Insert the water inlet hose into the | Water inlet hose | |
the control panel directly. (Pull it out to dismantle it) |
| |
|
| |
Select water level according to the quantity of the laundries. |
| |
Adjust the water level adjusting lever to desired water | Water level | |
adjusting lever | ||
level line. |
|
|
Attention: | Maximum | Max. |
| (about 55L) |
|
In water filling, do not exceed the"Maximum" water level. Medium | Med. | |
Otherwise the water may overflow out of the washing | (about 46L) | Min. |
Minimum | ||
machine. | (about 36L) |
|
Install the lint filter
After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub. See to the figure.
Overflow filter
Lint filter
4
