Haier HWM80-35 user manual Adjust the installation position

Minimum about 49L

about 68L

Medium

about 83L

Maximum

Before Using

Adjust the installation position

The largest permitted slope of the bearing surface of the washing machine is 2. Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods:

Hang a becket with weight to confirm if the washing machine is horizontal.

Install the water inlet hose ; Select the water level

Insert the water inlet hose into the water-inlet on the control panel directly. ( pull it out to dismantle it)

Fill the water to the water level selected according to the quantity of the laundries.

Attention: Do not exceed the " Maximum" water level , otherwise the water may overflow out of the machine.

Water level	Water inlet hose
indicator
	Water inlet
MAX
MED
MIN

Use the quick water inlet

Insert the water-filling jointer into water inlet hose, then push the water-filling jointer into the water inlet on the control panel. (To dismantle the water inlet hose, just push the control handle as indicated in the figure and pull it out)

Fill water into the wash tub directly through quick water inlet. It can reduce the humidity inside the control panel significantly and prolong the operating life of the components.

Water-filling jointer

Water inlet hose

Push

Control handle

Quick water inlet