
b Steps of using the operation buttons and |
description of the steps |
How to change the direction of the drain hose
1.Dismantle the rear cover of the washing machine.
3.Dismantle the drain outlet protecting cover at the other side, (the way is the same as the drain bushing),then install the drain
•
•
•
•
•• | Standard | Normal Tub dry |
• | Fibre | Quick |
• | Cotton | Posthaste |
• | Woollen | Jean |
• |
|
|
|
| y |
Power
2.Put down the drain hose Take off the drain hose frame as indicated in Figure 1.Take the drain hose into the cabinet
then nip the drain fixing clamp to make
it deviated from the clip | the other hand is used to put |
down the drain bushing | as indicated in Figure 2 3. |
bushing, as indicated in Figure 4.
4.Extend the drain hose from the other side. Fix the drain hose with drain hose frame onto the cabinet, as indicated in Figure 5.
6
Soak
Wash | Rinse |
|
Spin Reserve
5
| dr |
| Tub |
Water | Program |
| |
level |
|
Drain hose |
|
Drain hose support | Drain bushing |
Cabinet | Figure 2 |
drain outlet protecting cover
Figure 4 | Figure 5 |
Drain bushing
1.Push "power" button to switch on the power | Power |
2.Push "program" button to select suitable |
|
| Program |
Figure 1 | Inner | Outer |
| ||
| Push | Drain bushing |
Drain hose fixing | Take down | |
| ||
clamp |
|
|
| Push | Figure 3 |
|
|
5.Install the drain outlet protecting cover to the other side, as indicated in Figure 6
Figure 6
After the power is switched on, "normal"is automatically set. To select other
Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman .
Usage the drain hose
E.g. Set to "Quick wash" program for small quantity of laundries with light soil.
Push the "SOAK", "WASH", "RINSE" OR "SPIN" button to select suitable procedure.
Soak
Wash | Rinse |
|
| Spin |
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2.Do not step on or press the drain hose.
4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.
After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power,
if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former procedures will turn off automatically. The former procedures will not run. For instance: after switching on the power. If you push the "SPIN"button first, it will execute spin singly after starting.
3. If the drain hose is too long, cut it at mid point. To make 5.If the extra hose is too long, cut it either at A or at B. smooth drainage, cut the front end of the hose slantingly.
12 | 5 |