![](/images/new-backgrounds/1233150/23315021x1.webp)
Connection Instructions
COMPONENT (If connected to
3.Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
S-VIDEO Input
-To avoid picture noise (interference), leave an adequate distance between the VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
2.Make sure that the power of the
Connection Option 1
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Connection Option 2
1.Connect the audio and
2.Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the VCR owner s manual.)
3.Turn on the power of the
4.Press the SOURCE button to set the video
. input mode of the
mode .
2
1
VCR