INSTALLATION MANUAL FOR INDOOR UNIT

NOTICE

All Wiring of this installation must comply with NATIONAL, STATE AND LOCAL REGULATIONS. These instructions do not cover all variations for every kind of installation circumstance. Should further information be desired or should particular problems occur, the matter should be referred to your local distributor.

WARNING

BE SURE TO READ THESE INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION. FAI- LURE TO FOLLOW THESE INSTRUCTIONS COULD CAUSE SERIOUS INJURY OR DEATH, EQUIPMENT MALFUNCTION AND/OR PROPERTY DAMAGE.

(1)Preparation of indoor unit

Before or during the installation of the unit, assemble necessary optional panel etc. depending on the specific type.

(2)Select places for installation satisfying following conditions and at the same time obtain the consent on the part of your client user.

(a)Places where chilled or heated air circulates freely.

When the installation height exceeds 3m warmed air stays close to the ceiling. In such cases, suggest your client users to install air circulators.

(b)Places where perfect drainage can be prepared and sufficient drainage.

(c)Places free from air disturbances to the suction port and blowout hole of the indoor unit, places where the fire alarm may not malfunction or short-circuit.

(d)Places with the environmental dew-point temperature is lower than 28C and the relative humidity is less than 80%.

(When installing at a place under a high humidity environment, pay sufficient attention to the prevention of dewing such as thermal insulation of the unit. )

(e)Ceiling height shall have the following height.

Installation space

Combination with silent panel

366mm

100 or

100 or

more

more

more

 

50 or more

 

1000 or

 

 

Obstacle

Unit: mm

(3)Avoid installation and use at those places listed below.

(a)Places exposed to oil splashes or steam (e.g. kitchens and machine plants). Installation and use at such places incur deteriorations in the performance or corrosion with the heat exchanger or damage in molded synthetic resin parts.

(b)Places where corrosive gas (such as sulfurous acid gas) or inflammable gas (thinner, gasoline, etc) in generated or remains. Installation and use at such places cause corrosion in the heat exchanger and damage in molded synthetic resin parts.

(c)Places adjacent to equipment generating electromagnetic waves or high-frequency waves such as in hospitals.

Generated noise may cause malfunctioning of the controller.

16

Page 16 Page 18
Page 17
Image 17
Haier No. 0010572410 Preparation of indoor unit, Avoid installation and use at those places listed below
Page 16 Page 18

No. 0010572410 specifications

Haier No. 0010572410 is a state-of-the-art home appliance that embodies the brand's commitment to innovation, quality, and customer satisfaction. This model has garnered attention in the market for its advanced features and cutting-edge technologies designed to enhance user experience and efficiency.

One of the standout characteristics of Haier No. 0010572410 is its energy efficiency. Equipped with the latest energy-saving technology, this appliance reduces energy consumption without compromising performance. This feature not only contributes to lower electricity bills but also aligns with environmentally friendly practices, helping users reduce their carbon footprint.

The appliance boasts an impressive capacity, making it suitable for both small and large households. Its spacious design allows for better organization and storage, accommodating various types of items with ease. Whether it's used in a kitchen for food storage or in a laundry room for clothing, Haier No. 0010572410 ensures that users can make the most of the available space.

In terms of technology, the model incorporates smart features that allow for remote operation and monitoring. Users can control and manage their appliance through a smartphone app, providing convenience and flexibility. This technology enables users to set schedules, receive notifications, and even troubleshoot issues without the need for physical interaction with the appliance.

Safety is a top priority for Haier, and No. 0010572410 reflects this commitment. The appliance is equipped with multiple safety features, including automatic shut-off capabilities and child lock functions. These features ensure that users can operate the appliance safely and securely, making it a reliable choice for families.

Another key feature of Haier No. 0010572410 is its user-friendly interface. The intuitive controls and clear display make it easy for anyone to operate, regardless of tech-savviness. This focus on user experience allows individuals of all ages to take full advantage of the appliance's capabilities.

Overall, Haier No. 0010572410 represents a blend of efficiency, safety, and advanced technology, making it a top contender in its category. Whether for everyday use or special occasions, this appliance meets the diverse needs of modern households, setting a benchmark for quality and performance in the industry.
Top Page Image Contents