Function Setup
Function Setup
It is possible to select Menu Language, OSD translucency, position and screen display of the MENU as follows:
1. Press MENU button once, and then use VOL+/- button until the following menu appears on the screen:
Menu Language English
OSD Timeout 15seconds
Menu Background Translucent
Calendar
Auto Off Off
BlueScreen Off
Close Caption Off
Parental
AV1
B
C
A
2. Press the VOL+ button and then use CH+/- button on the remote controller to enter MENU of system setup.
3. Press CH+/- to select desired option on MENU.
4. Press VOL+/- to adjust selected option.
Menu Language Option
Repeat step 3 and 4 to select English, Francais or Espanol as the MENU Language.
OSD Timeout Option
Repeat step 3 and 4 to select menu display time to 5,10,15, 20, 25, 30 or 40 seconds.
Menu Background Option
Repeat step 3 and 4 to select OSD background as Translucent or Opaque.
Function Setup
Owner s Manual 23
Auto Off
Repeat step 3 and 4 to select On/Off. If On is selected, and there is no signal to the TV for 2 minutes , Auto Off will
be on the screen and for 3 minutes the TV will be in standby condition . If Off is selected , and there is no signal to the
TV for 3 minutes without any operation , no signal will be on the screen .
Calendar Display and Check
Repeat step 3 and press VOL+/- button to enter calendar menu as follows:
Enter Calendar menu, press VOL+/- and CH+/- button to
adjust or check the date.
BlueScreen
Repeat step 3 and 4 to select blue Screen between off or on.