Using sequence
Preparation before spinning
Please make the machine stand horizontally.
Confirm that the washing machine is earthed reliably . Then insert the power plug I nto the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.
Put down the drain hose .
Spin process
1 
Put the laundyies in properly
2 
Put the gland in properly
3 
Close the inner and outer coverof the spin tub
4
Do you need 
Rinsing-spinnning
has an effect that can remove the surplus liquid dirt, It works in a way as follows:
Spin
Spin for about 1~2 minutes
Remove most of the foam extra detergent liquid.
Fill water for | Spin for about |
about 1 minutes | 1~2 minutes |
Remove the detergent liquid remained
Note: If there needs no 
water-added
,
The effect is best when the laundries quantity is below 80% of the rated value.
5
Select spin time
OFF
5
1
4
2
Select suitable spin time according to the laundries, and do spinning Refer list 1 of page 3
3
Spin timer
6
Take the laundry out when the spinning ends.
When the spinning ends, open the top lid and the interior lid. Then take out the depression cover and laundry after the spinning drum has stopped rotation completely.
Note: 
Install the water inlet hose
The water hose should be connected Water inlet hose
as shown in the right figure. | Water inlet entrance |
|
