Washing sequence
Ï ´ µ Ó Ë ³ Ð ò
Wash timer
(To set to below 2 minute,
| OFF |
15 | 3 |
126
ÃÞ
9
Âé
WASH TIMER
Wash selector
(Strong current, standard current)
STRONG
STANDARD
DRAIN
WASH SELECTOR
Spin timer
(to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).
OFF
51
42
3
SPIN TIMER
Wash
1.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)
Run washing program for some time to stir and dissolve the powder completely.
2.Put in the laundries. If the water quantity is insufficient, please add water.
3.Select the current.
Select the strength of the current according to the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries. (Figure 3)
5.After washing,Set the "WASH SELECTOR" at "DRAIN". (Figure 4).
| Figure 1 |
STRONG |
|
STANDARD |
|
| DRAIN |
WASH SELECTOR | Figure 2 |
OFF |
|
15 | 3 |
126
9 | ÃÞ | Figure 3 |
WASH TIMER Âé |
|
|
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 4
8