![](/images/new-backgrounds/1303213/30321315x1.webp)
Installation
Connection of Connect the drain hose to a drain duct (with internal the Drain Hose diameter of at least 4 cm.) or place it for drainage into a sink or a tub, ensuring that there are no kinks or bends. The free end must be at a height of between 80 and 100 cm. Should it be necessary to fix the end of the hose at a height of less than 80 cm from the floor, the hose must be fixed in the appropriate hook on the upper part of the back panel (Fig.4) or use the
supplied support to fix the drain hose.(Fig.5)
Fig.4 | Fig.5 |
|
Connecting WaterSupply
Insert stainless steel screen washers into end of each supply hose and attach that end of supply hose to your 3/4" water tap spigot.Be sure that you match up cold water to "C" .Note:Home Centers also have"Y" connectors and "Couplings" which enable you to connect the machine to your sinks faucet.