Haier XPB40-32 user manual Preparation before washing Using process

1 Preparation before washing Using process

Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3.Hang the drain hose up.

Pay attention to followings before washing the laundries

Confirm	if	Clear the pocket.		Fasten	the	The	quantity of
there's	special	Take	out the	buttons	and	the	laundries
requirement for		coins ,	sand,	zippers.		shall	not exceed
the laundries.		hairpins etc.				the	rated value.
						The big laundries
						like	the	jeans
						shall	be	put in
						loosely.

When the pulsator is running , the buttons of the l a u n d r i e s m a y

cause	noise.	For
t h e	s a k e	o f

discretion,please put the laundries with buttons into other laundries.

A. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.

f. Do not put those laundries polluted by chemicals into the washing machine directly.