Washing sequence | Using process |
Wash timer | Wash selector | |
(To set to below 2 minute, | (standard current, | |
first set to 5 minute then | strong current) | |
turn it back. it can increase |
| |
the service life of the timer). |
| |
OFF | STRONG | |
| STAMDARD | |
| DRAIN | |
9 | ||
WASH SELECTOR | ||
WASH TIMER | ||
|
Spin timer
(to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).
OFF
3
SPIN TIMER
Wash
1.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)
Run washing program for some time to stir and dissolve the powder completely.
2.Put in the laundries. If the water quantity is insufficient, please add water.
3.Select the current.
Select the strength of the current according to the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries. (Figure 3)
5.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 4).
Figure 1
STRONG |
|
STANDARD |
|
| DRAIN |
WASH SELECTOR | Figure 2 |
|
OFF
Figure 3
WASH TIMER
STRONG
STANDARD
| DRAIN |
WASH SELECTOR | Figure 4 |
