How to change the direction of the drain hoses

Water inlet hose

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation

Back

position of the drain hose.

Soft item

Extend the drain hose from the side of spin tub

Front

Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2).

Embed the drain hose into the groove along the

Soft item

side of the spin tub in the order of (1)~(3), heading

for the side of the spin tub. (See to Figure 3).

Embed the drain hose into the groove with

hands. Take care not to damage the drain

hose in fastening the fixing clamp.

Figure 1

Figure 2

	Extend the drain hose from the rear side	Extend to the
	Extend the drain hose from the rear side	spin tub side
		spin tub side

Take out the drain hose from the fixing groove. Extend it fromthe rear side as per the direction of the arrow. (When the drainhose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4).

Embed into the groove in turn

Figure 3

Figure 4

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling entrance, then push the water-filling jointer into the wash water-filling entrance on the major frame.(To dismantle the water inlet pipe, just push the control handle

as indicated in the figure and pull it out)