Haier XPB65-27QGS Disposal after washing

After using, please clean the lint and foreign materials of the lint filter and lint frame

in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

1 Take off the filter frame.

As indicated in the figure, nip the elastic fixing

claw and pull it to the direction of the arrow to

take it off.

Too much lint on the filter frame will influence

the normal usage of the machine. Please

clean it every two months.

Elastic fixing

claw

Figure 2

Figure 3

Figure 1

1. Take off the lint filter

Put hand at the indicated position.

Push down to take it off. ( See to

Figure 1)

2. Clean the lint

Put it in water and clean while it is

still wet.(See to Figure 2)

3. Install the lint filter

After cleaning, insert the bottom

of the lint filter ( marked with

"down side") into the filter frame,

then push the upper part of the

filter in ( marked with " up side ").

(See to Figure 3)

The lint filter must be used during washing.

It must be cleaned in time after each using.

Using process

Disposal after washing