Haier XPB70-111S, XPB70-112S user manual Extend the drain hose from the rear side

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Side sectional view

Drain hose	Fixing hook
fixing hook	installation hole

Pull outwards	Drain hose
slightly

Extend the drain hose from the side of spin tub.

Figure 1

Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)

	Take off
	the drain hose
Drain hose	Figure 2
fixing hook

Rotate the drain hose fixing hook for 90 to take it	Rotate the fixing
out from the installation hole (As per Figure 3).	hook for 90
		Rotate the fixing
	Take off the fixing	hook for 90
		to fix it
	hook downwards

Install the two drain hose fixing hooks taken	Figure 3	Insert the fixing hook into the
out into the installation hole at the other side		installation hole upwards
		Figure 4
of the base frame (to aim at the installation
hole accurately you can lean the washing
machine forward slightly).Then rotate
for 90 (As per Figure 4).
Pull the fixing hook outwards slightly. Inlay the
drain hose into the fixing hooks reliably along
the groove at spin tub side, and make it extend
towards spin tub side.	Figure 5
		Figure 6

Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).

Extend the drain hose from the rear side

Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

5