How to change the direction of the drain hoses
Figure 1 indicates the ex factory |
| |
installation position of the drain | Figure 1 | |
hose. | ||
|
Extend the drain hose from the side of spin tub.
Side sectional view
Drain hose | Fixing hook | ||
fixing hook | installation hole | ||
Pull outwards |
| Drain hose | |
slightly |
|
|
|
|
|
| |
Take off
the drain hose
Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)
Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).
Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate for 90 (As per Figure 4).
Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.
Drain hose | Figure 2 |
fixing hook |
Rotate the fixing | Rotate the fixing |
hook for 90 | hook for 90 |
| to fix it |
Take off the fixing | Insert the fixing hook into the |
hook downwards | |
| installation hole upwards |
Figure 3 | Figure 4 |
Figure 5 | Figure 6 |
Extend the drain hose from the rear side
Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).
|
|
| Quick |
|
|
|
|
| |
If | you do not need spraying spin, you can Quick | |||
fill |
| water into the wash tub directly through | ||
this entrance. It can reduce the humidity inside the control panel significantly and prolong the operating life of the components.
5
