Halo Lighting System CHSL600 instruction manual What you need, What’s included, What to know

HSL600

CHSL600

Congratulations! You have purchased a Regent 600 watt dimmable halo- gen shoplight which will provide you with years of trouble-free service. This light has been designed to provide instant on, pure white light in a workshop, garage, basement or any place where an intense bright area light is needed. The fixture also has the capability of being adjusted to aim light without hav- ing to move the fixture to a new location.

What you need

•Screwdriver

•(2) Toggle bolts if mounted into drywall only

A

What’s included

•Fully assembled fixture with mounting chains (A)

•(2) “J”screw hooks (B)

•(2) 300 watt premium halogen bulbs (C)

•12” switch chain extension (D)

•(2) Wire safety guards/lenses (E)

E

C

B D

What to know

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR INJURYTO PERSONS

IMPORTANT SAFETY INSTRUCTIONS.

WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS:

•Lighted lamp is HOT!

•Do not remain in light if skin feels warm.

•For indoor use only.

•UL and CSA listed for dry locations.

•Fixture must be connected to a 120 Volt, 60 Hz power source. Any other connection voids warranty.

•Keep away from flammable objects.

• The bulb and fixture get extremely hot during use. Always unplug the light and let it cool 5 minutes before attempting to touch the fixture. Be sure to use handle to reposition fixture.

•Do not touch hot lens, guard, or enclosure.

•Bulb gets HOT quickly! Only contact switch/plug when turning on.

•The electrical system, and the method of electrically connecting the fixture to it, must be in accordance with the National Electrical Code and local building codes.

•Do not operate the unit with a missing or damaged wire safety guard, safety glass lens (lamp containment), or UV filter.

•Do not direct the light at persons or look directly at lighted fixture.

2