840105500 Ev04.qxd 11/2/02 10:47 AM Page 6
Optional Features (on select models)
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.
Steam Spray
Adjustable Steam Knob
This knob provides minimum steam for wool or maximum steam for linen. Set the knob to the Dry Iron ( 0 ) setting to iron without steam.
Auto Shutoff Reset Button/Light
This light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button/Light to turn the iron back on.
Power On Light
On units not provided with Auto Shutoff, this light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
Caring and Cleaning
Iron Storage
1.The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to Off. Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening.
2.After iron has completely cooled, wrap cord loosely around iron and store in an upright position. Do not store iron laying flat on soleplate.
Soleplate
1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.
2.To clean occasional
3.Always store iron upright in the heel rest position.
Self-Clean
To keep the steam vents clear of any
1.Fill iron with water then plug in iron.
2.Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes.
3.Turn Temperature Control Dial to Off. Unplug iron and hold over a sink with the soleplate facing down.
4.Turn Adjustable Steam Knob to CLEAN and gently pull the Knob up. Hot water and steam will flow out of steam vents. Allow all water to drain from iron.
5.Press and turn Adjustable Steam Knob counterclockwise to reset then let cool and store.
6 | 7 |
