840094100 ENv01 1/17/02 11:46 AM Page 5
To Vertical Steam
1.Unplug iron. Fill the Removable Reservoir according to directions. Replace Reservoir.
2.Plug iron into outlet.
3.Turn the Temperature Control Dial to the highest setting.
4.Allow 2 minutes for the iron to reach desired temperature.
5.Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror.
6.Hold iron about 6 inches away from garment and
press and release the Blast Button to steam out wrinkles. Do not press Blast Button more than once every 2 seconds.
7.To turn iron off, turn Temperature Control Dial to Off. Unplug iron.
8.Empty water from the iron following directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Optional Features (on selected models)
Adjustable Steam Knob
This switch provides minimum steam for wool or maxi- mum steam for linen. Set the switch to O to change to Dry 
Iron.
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of
| steam. Push Spray |
Blast | Spray Button to release a |
| fine spray of water |
| for difficult wrinkles |
| in cotton or linen. |
Automatic Shutoff Reset Button
and Power On
Reset Light – The
Button Automatic Shutoff Reset Button light comes on when
the iron is first Power plugged in. After
Light
1 hour, the iron will
shut off and the light will go out. Push the Reset Button to turn iron back on.
The Power On Light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
5
